.RadMediaPlayer{ background-color:#fff !important; }

t:case™ and t:case 480

Descriptions and Instructions for Use


The t:case and t:case 480 are designed to allow charging and cartridge changes without removing the pump from the case and can be used with or without the supplied metal clip. On the t:case, the clip can be oriented both vertically or horizontally, while the t:case 480 must be clipped vertically because of the larger cartridge of the t:flex® Insulin Pump.

 

Both cases are designed to allow you to charge your pump, as well as change your cartridge and tubing, without removing the pump from the case.

 

 

Instructions for Use

Click here for a printable version of the instructions below.

350x350_Accessories_Case_Image_Placing

To place the pump in the case:

  1. Disconnect from your site.
  2. Line up the wake button of the pump with the button on the top of the case, and thread the tubing though the cutout.
  3. Once the tubing is securely through the cutout, insert the right side of the pump into the case, then press down on the left side.

350x350_Accessories_Case_Image_Removing

To place the pump in the case:

  1. Disconnect from your site.
  2. Line up the wake button of the pump with the button on the top of the case, and thread the tubing though the cutout.
  3. Once the tubing is securely through the cutout, insert the right side of the pump into the case, then press down on the left side.

350x350_Accessories_Case_Image_Clip_Orientation

To change the t:case clip orientation:

  1. Remove the pump from the case.
  2. Once the pump is removed, using your fingernail or a small flathead screwdriver, lightly lift up the plastic tab behind the clip and slide the clip out.
  3. Slide the clip into the other slot until it clicks.

 

 

Watch this video to learn more about working with the t:case and your pump.

0:00 / 0:00

 
 

 

Visit our webstore to shop additional colors!

 
Shop Now

Accesories_Case_Colors_tcase
Accesories_Case_Colors_tcase480